Applied – Page 6 – Sarv Study

February 22, 2018

Master degree program in Applied physics and Mathematics, Kavli Institute for Systems Neuroscience, Norway

By admin Applied, Applied sciences, Atomic, Biological Engineering, Biomedical Engineering, Biophysics, Classical, Computational, Engineering and Technology, Europe, Logic, Mathematics, Medicine and Health Sciences, Physics, SCIENCES, Statistics, Theoretical Computer Science

Applied physics and mathematics form the basis of all technological development. Physics is a science based on experiments, measurements and mathematical analysis to find physical laws for everything from microcosmos to macrocosmos. Mathematics is the language of science and technology, and it is also an important part of our cultural heritage. It’s a work in progress.

The time it takes from an idea in physics are born until it comes to technological application, becomes increasingly shorter. Mathematical and statistical analysis, mathematical modelling and calculation techniques can be used to solve a wide variety of problems in various subject areas. Climate studies, medicine, electronics and renewable energy can illustrate the range of applications.

As an Applied Physics and Mathematics graduate, you will acquire knowledge that enables you to contribute to the technological development. You will also be part of an increase in the understanding of the world around us and how it develops.

Master of Science in Applied Physics and Mathematics offers the following main profiles:

Applied Physics
Biophysics and medical technology
Industrial Mathematics

Deadline:-The application deadline for the programme is March 1st for students with an international degree, and April 15th for Norwegian and Nordic degree students. Students apply through Samordna Opptak.

Admission:-

You have to meet the Norwegian language requirements, or have a Scandinavian language as your mother tongue, if you want to apply to any of NTNU’s degree programmes. You also must meet the basic requirement for admission, and demonstrate that you meet the English language requirements.

For more information please visit program website

February 7, 2018

Master of Science Program in Electrical Engineering, Blekinge Institute of Technology, Sweden

By admin Applied, Electrical Engineering, Engineering and Technology, Europe, Logic, Mathematics, Physics, SCIENCES, Statistics

If you want to learn more about future communications systems, this programme is for you. It mainly focuses on future communications networks and the problems and challenges these will entail.The programme deals with issues affecting computer networks, the internet, mobile systems, cloud communications, software defined networks (SDN), user-perceived service quality (QoE), network-based services and research methodology. You will acquire the knowledge necessary for qualified development work within the industry and a basis for research studies through technical knowledge and analytical skills. You will meet and collaborate with researchers within telecommunication systems and acquire a good understanding of the field.The programme consists of 120 credits and leads to a two-year Master’s degree.

Post type:- Master

Commencing:-3,September 2018

Requirements:-

Admission to the programme requires Bachelor’s Degree (180 credit points) with one of the main areas of electrical engineering, computer science, software engineering, information system or computer engineering. Bachelor’s degree must include 15 credit points in mathematics, 7.5 credit in data communications/tele communications, where basic layer 2 and 3 communication (TCP/IP) is included, object-oriented programming and English B/English 6.

Specific eligibility in the English language from upper secondary school for non-Swedish students:
TOEFL 575/90; IELTS 6,5 no section below 5.5, or University of Cambridge and Oxford tests.

Exemption will be given for the requirement: basic layer 2 and 3 communication (TCP/IP).

How to Apply:-

Applications that are accepted for review based on the basic requirements for the programme will be ranked according to the details above. If not all applicants with the same lowest merit point can be admitted, a preference is given to the gender that is least represented at the programme, and if further selection is needed lots will be drawn.

For more information please visit program website

January 31, 2018

This Master of Science in Aerospace Engineering program is jointly awarded by Technical University of Munich (TUM) and Nanyang Technological University (NTU). The program is conducted in Singapore at TUM Asia. TUM Asia is TUM’s only offshore campus that is situated in the heart of Asia – Singapore. TUM Asia is a full subsidiary of TUM and is an international extension of TUM, to provide TUM degrees in Asia, in cooperation with top Asian universities like NTU.

This joint degree serves to provide graduates with an in-depth knowledge in the field of Aerospace Engineering, focusing in the areas of aeronautical and space design and research.

The program is jointly taught by academia from NTU and TUM, who have extensive experience in the latest trends in research and education as well as in global industrial product development and management. The non-technical subjects are taught by experts from the industry, from Asia and Europe alike. Lectures will be held across TUM Asia‘s and NTU‘s campuses in Singapore. Students who have passed all examinations will be awarded a joint Master degree from TUM and NTU.

This course equips its graduates to meet the international and interdisciplinary demands of the aerospace industry. The high-level understanding of necessary interactions between many disciplines is a key qualification required by the aerospace sector and many others. Confidence is placed in our graduates to undertake global endeavors encompassing the entire value chain and requiring a large amount of international cooperation. This allows them to master the growing challenges posed by the aerospace industry’s cutting edge technology.

Post type:- Master

Duration:- 4 semesters

Deadline:- 31, March 2018

Requirements:-

Minimum requirements to apply for a Master’s program at TUM are a recognized undergraduate degree (e.g. a bachelor’s) and the successful completion of the aptitude assessment procedure. Aptitude assessment allows the TUM school or department to which you are applying the opportunity to evaluate your individual talents and motivation for study.

How to apply:-

We may require additional documents depending on the type of secondary school diploma you earned and your country of origin (e.g. GRE, GATE, APS). After completing the online application process, you will receive a list of documents you must submit to TUM in hard copy by the application deadline.

For more information please program website

January 31, 2018

Chemical engineers bring about innovation and improvements in process industries, such as those concerned with the manufacture of chemicals, food, fuel and pharmaceuticals.

The Department of Chemical Engineering was founded in 1912 and undergraduate degrees were first formally taught from 1937.

On this professionally accredited course, you will learn to apply scientific, engineering and business principles to a variety of complex practical issues.

Students on this course will be fully qualified in Chemical Engineering but will also take a series of specialist modules which will give you a basis for employment in the nuclear and related industries.

Post type:- Masters

Duration:-4 years

Start date:- October 2018

Requirements:-

Typical offer range

As a guide, here are the typical offers made in 2016 to at least 85% of applicants studying A-levels:

Three A-level offer: A*A*A*

Four A-level offer: A*A*AA–A*A*A*A

Subject and grade requirements (2018 entry)

We expect applicants for 2018 entry to meet the following grade requirements in these subjects:

A* in Mathematics
A* in Chemistry
A in a relevant subject(s) including Physics, Biology, Further Mathematics and/or Economics

General Studies and Critical Thinking are not accepted.

Practical endorsement (practical science assessment)

If you are made an offer you will be required to achieve a pass in the practical endorsement in all science subjects that form part of the offer.

For more information please check here

How to apply:-

Please check here

Please visit program website

January 25, 2018

Bachelor of Building Systems Engineering, Conestoga College, Canada

By admin Applied, Canada, Chemistry, Civil Engineering, Classical, Computational, Industrial Engineering, Logic, Mathematics, Modern, Physics, Software Engineering, Statistics, Theoretical Computer Science

The Bachelor of Engineering – Building Systems Engineering (BSE) program is the newest professional engineering degree offering in the School of Engineering and Information Technology and is delivered at the honours level. This degree program is unique in Canada as it relates to the complex and ever-changing world of buildings and will allow you to start down the path to pursuing a professional engineering career through licensing with Professional Engineers Ontario. It is geared to motivated individuals looking for challenging careers in building systems, energy and utilities management, building operations and facility management.
The program is delivered using a project-based learning environment, where students will find solutions to real-world problems developing the ability to see the big picture and concurrently trade-off engineering, business, societal, and other requirements to optimize and tailor the project solution to the design requirements. Students will study topics such as: lighting, heating, energy, water management, law and building codes. They will design building systems for new technologically-advanced buildings, but also study retrofitting and applying new technologies to older buildings.

Post type:-Bachelor

Duration:-4 years

Commencing:- Year 2018

Requirements:-

Ontario Secondary School Diploma (OSSD), or equivalent, OR 19 years of age or older
A minimum of six (6) Grade 12 courses with a minimum cumulative average of 65%, including five (5) required U level courses and one additional U or M level course (Higher averages are often required for admission due to competition for available spaces in the program.)
The following Grade 12 U courses, or equivalent, are required:
- English (ENG4U)
- Chemistry (SCH4U)
- Physics (SPH4U)
- Calculus and Vectors (MCV4U)
- One (1) Grade 12 Mathematics course from the following: Advanced Functions (MHF4U) OR Mathematics of Data Management (MDM4U)
- One (1) other Grade 12 U or M course

For more information please check here

How to apply:-

1. Choose your program

2. Submit application through ontariocolleges.ca

…Visit ontariocolleges.ca and complete the online application

3. Transcripts

….Forward all documents to ontariocolleges.ca.

For more information please check here

Please visit program website

For application guidance

Send your CV at info@sarvgroup.in, we will guide you step by step in the application process.Please

do mention BBSE, Conestoga College in the subject line of your email.

January 24, 2018

Successful pilots and business people have a lot in common — they are skilled communicators, develop plans for success, assess conditions, and anticipate change. Take your passion for flight to new heights with UFV Aviation’s Bachelor of Business Administration (BBA).

You get to graduate with a bachelor’s degree, private pilot’s license, commercial pilot’s license, and several ratings that enable you to fly multiple types of aircraft in varying conditions. Your pilot’s license is in accordance with ICAO standards, meaning you can fly domestically and internationally.

Throughout the program, you take a combination of flight training, aviation theory, and academic courses.

You complete your flight training at an external flight training provider, approved by UFV.

In your first year, you earn your private and commercial pilot’s licenses; in your third and fourth year, you fly multi-engine aircraft, master instrumentation, and specialize with either a Heavy Jet Transport or Professional Flight Instructor option.

Post Type:- Bachelor

Commencing:- Year 2018

Duration:-4 years

Requirements:-

For High school graduates

B.C. secondary school graduation, or equivalent. (Students who have completed a high school equivalency program will also be considered but may have to complete the specific entrance requirements below.)
Prerequisites for MATH 141.
Prerequisites for CMNS 125.
Physics 11 or equivalent, with a minimum of C+.
Note: Accounting 11 or 12, Physics 12, and second language courses are recommended.
Current Transport Canada Category 1 medical certification.
In addition to the above, applicants must also satisfy an entrance evaluation which includes an interview(s), a qualifying exam, and an assessment of references.

For more information please check here

How to apply:-

Apply online at ufv.ca/admissions/admissions/apply. International students pay higher application fees and should contact UFV International. Additional documents required for a complete application:
- Proof of B.C. secondary school completion or equivalent, and transcript (or interim transcript) showing grade achievement as per entrance requirements.
- Transcripts showing grade achievement for any post-secondary study.
- A medical certificate showing a Transport Canada Category 1 Medical.
Apply to Coastal Pacific Aviation at coastalpacific.com.
Qualified applicants will be interviewed by Coastal Pacific during February or March for September enrolment.
After evaluations have been made, interviewed candidates will receive a letter stating the results. Candidates being offered a seat will receive a confirming letter, outlining registration details and starting dates. Prior to acceptance the candidate may be required to provide proof of financial ability to pay for educational expenses.
Any requests for transfer of academic course equivalencies should be made to the Office of the Registrar; requests for transfer of aviation- or flight-related courses should be made directly to Coastal Pacific Aviation.

Please visit program website

For application guidance

Send your CV at info@sarvgroup.in, we will guide you step by step in the application process.Please

do mention BBA, University of the Fraser in the subject line of your email.

January 24, 2018

Mechanical Engineering Technology Diploma, Red River College, Canada

By admin Applied, Astrophysics, Canada, Chemistry, Computational, Computer Science, Engineering and Technology, Experimental, Fluid, Logic, Mathematics, Mechanical Engineering, Modern, Physics, Software Engineering, Statistics

This program prepares you to work in the design and production of high-quality manufactured goods. The topics covered include:

Design
Manufacturing methods
Quality assurance
Equipment selection
Computer-aided engineering
Building systems design and control
Mechanical analysis
Computer applications
Supervision and management

You will select some specialty electives in your last term. This specialization completes your training by providing deeper insight into areas of technology that are of interest to you. These areas of specialization have been developed to help meet the needs of industry.

The Mechanical Engineering Technology diploma has been accredited by the following:

Certified Technicians and Technologists Association of Manitoba
Canadian Council of Technicians and Technologists, providing Canada-wide reciprocity with other provincial organizations

Prior to starting the program, you will be invited to attend a program overview information session. You will also be invited to participate in a math and reading skills diagnostic testing session that will advise you of your program readiness.

Post Type:-Diploma

Duration:- 28 months

Commencing:- Year 2018

Requirements:-

Grade 12
- Submit proof of successful completion of or enrolment in Grade 12, including one credit in each of the following:
  - Grade 12 English
  - Grade 12 Applied Math 40S or Pre-Calculus Math 40S
  - Grade 12 Chemistry or Physics
- Grade 12 Physics is much more highly recommended than Grade 12 Chemistry as an appropriate background for technology
- Due within 30 days of applying. However, if you apply within six weeks of the start date of the program, this item is due within 5 days of applying.
- If you provide proof of enrolment, your official final grades indicating successful completion must be submitted by July 15 for fall enrolment or by the deadline specified in your admission letter
- If you completed your education outside of Canada or the United States, do not submit your international academic credentials until requested to do so. See Regular Admission Requirement 2 for more information.
English Language Requirements (ELRs)
- If you were educated outside of Canada or the United States, submit results of an English language proficiency assessment (ELPA) indicating you meet the following ELRs:
  - Language Instruction for Newcomers to Canada (LINC) Certificate – exit Canadian Language Benchmark (CLB) levels from an English as a second language (ESL) program:
    Listening 8, Speaking 8, Reading 8, Writing 8
    or
  - International English Language Testing System (IELTS – Academic):
    Listening 6.5, Speaking 6.5, Reading 6.5, Writing 6.0
    or
  - Canadian Test of English for Scholars and Trainees (CanTEST):
    Listening 4.5, Speaking 4.5, Reading 4.5, Writing 4.0
- Due within 30 days of applying. However, if you apply within six weeks of the start date of the program, this item is due within 5 days of applying.
- We strongly advise you successfully complete an English language proficiency assessment (ELPA) before submitting your application to ensure you can meet the 30 day deadline.
- ELPAs must be dated within two years of your application date.
- After confirming you meet ELRs, the College will send you a request to submit your international academic credentials for assessment.
- How to Apply:-
- Online applications are the quickest and easiest way to apply, plus they get processed much faster than paper applications. You’ll start your online application by creating an account with Red River College that will allow you to:
  - Work on your application over several sessions
  - Provide information about your academic history
  - Upload required documents (for specific programs) and check the status of them
  - Update your personal information
  - Request information about RRC services
  - View your final application For more information please check here Please visit program website
- For application guidance
  Send your CV at info@sarvgroup.in, we will guide you step by step in the application process.Please do mention METD, Red river in the subject line of your email.

January 22, 2018

Diploma in Electrical Engineering Technician, Niagara College, Canada

By admin Applied, Applied sciences, Canada, Computer Science / Engineering, Electrical Engineering, Engineering and Technology, Mathematics, Physics, Statistics

In today’s high-tech world, electrical engineering technicians need to understand a wide range of electrical and electronic systems. Graduates of this program work in positions ranging from apprentice electricians, assembly technicians, lab technicians and technical specialists to maintenance and quality control supervisors.

Career Opportunities

Electrical contractors
Electric utilities
Electrical/electronic service companies
Electrical suppliers
Electrical equipment manufacturers

Post type:- Diploma

Commencing:-Year, 2018

Duration:- 2 Years

Requirements:-

English – any Grade 12 (C) or (U), or equivalent
Mathematics – any Grade 12 (C) or (U), or equivalent
Physics – Grade 11 (U) or Grade 12 (C) or (U)

How to Apply:-

Applicant’s name, address, postal code as it appears on the applicant’s passport
Applicant’s personal phone number and email
For post-secondary applicants, the name(s) of the secondary school previously attended
For post-graduate applicants, the name(s) of all previous post-secondary and post-graduate institutions attended.

Please visit program website

For application guidance

Send your CV at info@sarvgroup.in, we will guide you step by step in the application.Please do mention DEET, Niagara in the subject line of your email.

January 20, 2018

The Master of Engineering Science is a 1.5-year program designed for applicants with a background in engineering. For more information about admission requirements, check the Program Rules.
Complete a range of courses from one of the following fields: Electrical Engineering, Software Engineering, or Systems Engineering. Each field of study has a huge number of courses to choose from, which cover a diversity of relevant topics.
Undertake a research project in the broad fields of electrical, computer systems, software or mechatronics engineering. You’ll be expected to systematically plan and manage your project, and to clearly present your findings and what they contribute to your field.
Benefit from a program that offers a flexible study plan. Because the Master of Engineering Science has such a large number of courses to choose from, you can tailor your studies to suit your interests, your industry, or your career goals.

Post type:- Master

Finances:- Please check here

Deadline:- semester 1 – November 30 (2017) semester 2 – May 31 (2018)

Commencing:-Semester 1 (19 Feb, 2018)
Semester 2 (23 Jul, 2018)

Requirements:-

Degree equivalent to an Australian bachelor degree in Engineering (in the relevant field of study for which they wish to enrol) with a GPA of at least 4.5 on a 7 point scale. View additional entry requirements for applicants with overseas qualifications.

English Proficiency

IELTS overall 6.5; reading 6; writing 6; speaking 6; listening 6. For other English Language Proficiency Tests and Scores approved for UQ, view the English proficiency policy.

Visa requirements

International students who are accepted into full-time study in the Master of Engineering Science are eligible to apply for an Australian student visa.

The Australian Government has simplified the visa application process. Now, all international students apply for the Student Visa (subclass 500).

There are a number of requirements you must satisfy before a visa is granted. Find out more about the visa application process.

How to apply:- please check here

For more information please visit program website

Previous page 1 … 4 5 6

Category Archives: Applied

Master degree program in Applied physics and Mathematics, Kavli Institute for Systems Neuroscience, Norway

Admission:-

Master of Science Program in Electrical Engineering, Blekinge Institute of Technology, Sweden

Requirements:-

How to Apply:-

Master Program in Aerospace Engineering, Technical University of Munich, Germany

Requirements:-

How to apply:-

MEng Chemical with Nuclear Engineering program, Imperial College London, UK

Requirements:-

How to apply:-

Bachelor of Building Systems Engineering, Conestoga College, Canada

Requirements:-

How to apply:-

Bachelor of Business Administration (Aviation), University of the Fraser Valley, Canada

Requirements:-

How to apply:-

Mechanical Engineering Technology Diploma, Red River College, Canada

Requirements:-

How to Apply:-

Diploma in Electrical Engineering Technician, Niagara College, Canada

Career Opportunities

Requirements:-

How to Apply:-

Master Program in Engineering Science, University of Queensland, Australia

Requirements:-